How can we help you?

Nadat u uw productie-installatie heeft aangemeld bij VertiCer zal de netbeheerder en/of het meetbedrijf deze aanmelding beoordelen. Na goedkeuring ontvangt u vanuit VertiCer een bevestiging van inschrijving. Op dezelfde dag wordt RVO door VertiCer geïnformeerd dat uw productie-installatie is ingeschreven.

If you want to act as an intermediary, you will need eHerkenning with at least level EH3 with chain authorisation. For more information or to set up chain authorisation, please contact your eHerkenning broker. 

For chain authorisation, you must at least indicate that you want to be authorised for the My VertiCer login service (this allows you to, among other things, register an installation on behalf of producers or create an end-user account for certificate deductions).

As an intermediary, you cannot use your own Chamber of Commerce number when asked on behalf of which producer you want to log in. This will in fact register the production installation on the Chamber of Commerce number of yourself, as intermediary. Using an eHerkenning chain authorisation, a production facility can be registered on the Chamber of Commerce number of the producer.

The email address entered will be used for all correspondence regarding the installation, such as registration confirmation emails.

You cannot use iDIN as an intermediary. iDIN can only be used by natural persons to provide or log in data and not by companies.

You can only change your trader in MyVertiCer. If your production installation has changed, you must re-register it via MyVertiCer. Choose your role in the menu to go to MyVertiCer.

Nadat u uw productie-installatie heeft aangemeld bij VertiCer zal de netbeheerder en/of het meetbedrijf deze aanmelding beoordelen. Na goedkeuring ontvangt u vanuit VertiCer een bevestiging van inschrijving. Op dezelfde dag wordt RVO door VertiCer geïnformeerd dat uw productie-installatie is ingeschreven.

You will receive a message from us about 3 months before your registration expires. You can re-register your production installation including measurement protocol from then on.
If the measurement protocol expires, VertiCer will no longer issue Guarantees of Origin. You must re-register your production installation including measurement protocol.

If you want to act as an intermediary, you will need eHerkenning with at least level EH3 with chain authorisation. For more information or to set up chain authorisation, please contact your eHerkenning broker. 

For chain authorisation, you must at least indicate that you want to be authorised for the My VertiCer login service (this allows you to, among other things, register an installation on behalf of producers or create an end-user account for certificate deductions).

As an intermediary, you cannot use your own Chamber of Commerce number when asked on behalf of which producer you want to log in. This will in fact register the production installation on the Chamber of Commerce number of yourself, as intermediary. Using an eHerkenning chain authorisation, a production facility can be registered on the Chamber of Commerce number of the producer.

The email address entered will be used for all correspondence regarding the installation, such as registration confirmation emails.

You cannot use iDIN as an intermediary. iDIN can only be used by natural persons to provide or log in data and not by companies.

You can only change your trader in MyVertiCer. If your production installation has changed, you must re-register it via MyVertiCer. Choose your role in the menu to go to MyVertiCer.

For electricity, green gas and hydrogen: 

You can make the trader switch yourself in MyVertiCer. Choose your role in the menu bar with the appropriate energy carrier. Through this page you can go to MyVertiCer.

1. If you take over or transfer the right to subsidy, arrange this with RVO 
2. You can deregister your production installation in MyVertiCer
3. The new owner must create an account in MyVertiCer
4. Once the account is registered in VertiCer, the new owner can register the production installation
5. After the new registration is processed by the grid operator or metering company, VertiCer sends the new owner a confirmation.

1. If you take over or transfer the right to subsidy, arrange this with RVO. 
2. If your do not have an account yet, you must create an account with VertiCer.
3. Once the account is registered with VertiCer, the production installation can be registered.
4. After the new registration is processed by the grid operator or metering company, VertiCer sends you a confirmation.

You can only change your trader in MyVertiCer. If your production installation has changed, you must re-register it via MyVertiCer. Choose your role in the menu to go to MyVertiCer.

1. If you take over or transfer the right to subsidy, arrange this with RVO. 
2. If your do not have an account yet, you must create an account with VertiCer.
3. Once the account is registered with VertiCer, the production installation can be registered.
4. After the new registration is processed by the grid operator or metering company, VertiCer sends you a confirmation.

If any significant changes are made to the metering or to the production installation, you must notify your measurement manager in good time. If necessary, the measurement protocol should be adjusted accordingly. Has the data changed? Then re-register your installation.

You can only change your trader in MyVertiCer. If your production installation has changed, you must re-register it via MyVertiCer. Choose your role in the menu to go to MyVertiCer.

You can only change your trader in MyVertiCer. If your production installation has changed, you must re-register it via MyVertiCer. Choose your role in the menu to go to MyVertiCer.

Have you registered your production plant? You can find the status of your production installation in MyVertiCer below 'Mijn productie installaties'. Under the overview you can find the explanation of the status.

Click here to go to MyVertiCer.

RVO can only start the subsidy payment after your production plant is registered. For all questions about the subsidy, please refer to RVO.

Nadat u uw productie-installatie heeft aangemeld bij VertiCer zal de netbeheerder en/of het meetbedrijf deze aanmelding beoordelen. Na goedkeuring ontvangt u vanuit VertiCer een bevestiging van inschrijving. Op dezelfde dag wordt RVO door VertiCer geïnformeerd dat uw productie-installatie is ingeschreven.

Have you registered your production plant? You can find the status of your production installation in MyVertiCer below 'Mijn productie installaties'. Under the overview you can find the explanation of the status.

Click here to go to MyVertiCer.

You can access your measured values when logging into MyVertiCer. Choose your role in the menu bar with the appropriate energy carrier. You can access MyVertiCer via this page. 

RVO can only start the subsidy payment after your production plant is registered. For all questions about the subsidy, please refer to RVO.

The manuals can be found at 'Downloads'.

If you want to act as an intermediary, you will need eHerkenning with at least level EH3 with chain authorisation. For more information or to set up chain authorisation, please contact your eHerkenning broker. 

For chain authorisation, you must at least indicate that you want to be authorised for the My VertiCer login service (this allows you to, among other things, register an installation on behalf of producers or create an end-user account for certificate deductions).

As an intermediary, you cannot use your own Chamber of Commerce number when asked on behalf of which producer you want to log in. This will in fact register the production installation on the Chamber of Commerce number of yourself, as intermediary. Using an eHerkenning chain authorisation, a production facility can be registered on the Chamber of Commerce number of the producer.

The email address entered will be used for all correspondence regarding the installation, such as registration confirmation emails.

You cannot use iDIN as an intermediary. iDIN can only be used by natural persons to provide or log in data and not by companies.

All information about eRecognition can be found on the eHerkenning website.

All information about eRecognition can be found on the eHerkenning website.

The manuals can be found at 'Downloads'.

If you want to act as an intermediary, you will need eHerkenning with at least level EH3 with chain authorisation. For more information or to set up chain authorisation, please contact your eHerkenning broker. 

For chain authorisation, you must at least indicate that you want to be authorised for the My VertiCer login service (this allows you to, among other things, register an installation on behalf of producers or create an end-user account for certificate deductions).

As an intermediary, you cannot use your own Chamber of Commerce number when asked on behalf of which producer you want to log in. This will in fact register the production installation on the Chamber of Commerce number of yourself, as intermediary. Using an eHerkenning chain authorisation, a production facility can be registered on the Chamber of Commerce number of the producer.

The email address entered will be used for all correspondence regarding the installation, such as registration confirmation emails.

You cannot use iDIN as an intermediary. iDIN can only be used by natural persons to provide or log in data and not by companies.

All information about eRecognition can be found on the eHerkenning website.

All information about eRecognition can be found on the eHerkenning website.

The manual can be found at Downloads.

Rates can be found here.

Please note!!! Due to the new tariffs 2024, the tariff for the "Creation of GvO Thermal and Electricity" on the invoice has been harmonised with Green Gas and Hydrogen. As a result, the rate for all energy carriers per GvO will be €0.010 in total being €0.005 for creation and €0.005 for transfer to the trader.

Electricity and thermal energy certificates can only be bought by traders. For green gas and hydrogen certificates, both a trader and end user can buy certificates. 
So to buy certificates, you need to sign up as a trader or end user.

You can access your measured values when logging into MyVertiCer. Choose your role in the menu bar with the appropriate energy carrier. You can access MyVertiCer via this page.